ATMOS KC16S coal gasification boiler 18 kW

Product Overview & Application

The ATMOS KC16S coal gasifier is a manually fed hot water boiler designed for lignite briquettes and intended for heating family homes, weekend houses, and similar properties. The model operates with a boiler heat output of 18 kW and can also use dry split logs as an alternative fuel. This makes the boiler suitable for operators looking for a robust solid fuel boiler with classic manual feeding and water-based integration.

Technology & Equipment

The boiler body is a welded steel construction and operates on the principle of downdraft gasification with an induced draft fan. Ceramic moldings are used in the lower combustion chamber, while the rotating grate mechanism with secondary air supply supports combustion and facilitates ash removal. The equipment includes a thermometer, boiler thermostat, flue gas thermostat, safety thermostat, and a cooling loop to prevent overheating. Primary and secondary air can be adjusted separately, allowing adaptation to the fuel and operating conditions.

Everyday Advantages

In daily operation, the KC16S scores with clear, mechanically straightforward boiler technology. The induced draft fan helps reduce smoke when refueling, and the grate mechanism aids in removing ash during operation. For the user, this means straightforward operation with robust technology, easily accessible cleaning areas, and a design tailored for classic use with lignite briquettes.

System Integration & Compatibility

The boiler is designed for integration into a water-based heating system and requires a professionally designed chimney as well as a boiler room with an adequate combustion air supply. The documentation specifies a minimum required return temperature of 65 °C and a boiler operating range of 80 to 90 °C. For low-corrosion operation, the manufacturer describes integration with return temperature boosting, e.g., via a Laddomat 22 or a suitable thermostatic control valve; additionally, combining it with buffer tanks is described as a sensible system solution.

Installation

Installation must be planned for a boiler room with adequate combustion air; the manual specifies an opening of at least 300 cm² for systems from 15 to 75 kW. The connection to the chimney, flue duct, heating system, and power supply must be carried out professionally. For operation, return temperature boosting and protection against overheating must be considered; the manufacturer also recommends a concrete or steel foundation under the boiler.

Notes

The KC16S is designed for lignite briquettes; dry split logs serve as an alternative fuel. During operation, doors, covers, and the start-up flap must be operated in the intended position, and the boiler must be cleaned regularly to maintain performance and service life. The documentation also specifies an annual technical inspection of the boiler room and exhaust system, as well as a CE declaration of conformity for the series.

Scope of Delivery

• ATMOS KC16S coal gasification boiler
• Steel brush with accessories
• Poker
• Filling valve
• Operating and maintenance manual
• Honeywell FR 124 draft regulator
• Ash container